Hi
I just received my LimeSDR Mini today. I Installed the Linux drivers and tools and hoooked it up.
When I tried LimeQuickTest I got an EEPROM faiulure. I have tried this on two Linux PCs, both running Ubuntu 16.04.
charles@yaffs-dev:~$ LimeQuickTest
[ TESTING STARTED ]
->Start time: Sat Jul 28 16:05:33 2018
->Device: LimeSDR Mini, media=USB 3.0, module=FT601, addr=24607:1027, serial=1D3C03C5D1EA3C
Serial Number: 1D3C03C5D1EA3C
[ Clock Network Test ]
->REF clock test
Test results: 54796; 2457; 15654 - PASSED
->VCTCXO test
Results : 6711019 (min); 6711179 (max) - PASSED
->Clock Network Test PASSED
[ FPGA EEPROM Test ]
->Read EEPROM
->Read data: 00 00 00 12 03 14 02
->FPGA EEPROM Test FAILED
[ LMS7002M Test ]
->Perform Registers Test
->External Reset line test
Reg 0x20: Write value 0xFFFD, Read value 0xFFFD
Reg 0x20: value after reset 0x0FFFF
->LMS7002M Test PASSED
[ RF Loopback Test ]
->Configure LMS
->Run Tests (TX_2 -> LNA_W):
CH0 (SXR=1000.0MHz, SXT=1005.0MHz): Result:(-12.3 dBFS, 5.00 MHz) - PASSED
->Run Tests (TX_1 -> LNA_H):
CH0 (SXR=2100.0MHz, SXT=2105.0MHz): Result:(-11.3 dBFS, 5.00 MHz) - PASSED
->RF Loopback Test PASSED
=> Board tests FAILED <=
Elapsed time: 2.33 seconds
Pointers?
Thanks
Charles