OpenAirInterface configuration

[Laurent]

I made a new set of measurements with a R&S analyzer:
https://open-cells.com/index.php/2018/05/04/limesdr-new-set-of-tests/

My results is that the LimeSDR driver is still not stable and usable, on Tx, and probably also on Rx
Also, the Lime .ini file is mandatory: even calling all available setting and calibration functions on the API is not enough to run correctly a LimeSDR.

There is no explanations on how to build such .ini file.

I’ve put more details on the results:
https://open-cells.com/index.php/2018/05/04/limesdr-new-set-of-tests/

details on the calls to the limeSDR API to try to setup a correct configuration:

LimeSDR still not stable

Hi, We contributed, one year ago to the topic: “Something wrong with calibration procedure” In this time, a good fix in the calibration procedure has been delivered, thanks. Also, we got a Lime .ini file, that enable us to start some LTE tests. Nevertheless, even after one more year, LimeSDR board is still unusable for the primary goal of the LM7002: LTE. Users need to remove .ini file (USRP removed such file some years ago). Instead we need a API that ACTUALLY configures the board properl…

I don’t think LimeSDR is working fine: with a good ini file, in specific band and frequency, one may reach a RF communication, BUT too many problems are still existing (see this blog other reports).