LimUtil --update scrogged - how to start over?

Projects LimeSDR
3

hi @cswiger,

It looks like there was firmware update interrupt. Now FX3 MCU boots into bootloader mode.
You may try the following steps using LimeSuiteGUI:

  1. Download the latest firmware image file;
  2. Connect the LimeSDR board;
  3. Run LimeSuiteGUI and connect to the device;
  4. Go to Modules -> Programming menu;
  5. Select FX3 in Device list and Firmware to RAM in Programming mode. Open image file you downloaded in the step 1;
  6. Push Program and wait till programming is finished;
  7. Connect to the device again in LimeSuiteGUI. Now you will see it as usually;
  8. Perform step 4;
  9. Set everything as in step 5 just choose Firmware to Flash instead of Firmware to RAM in Programming mode;
  10. Push Program and wait till programming is finished.

Check if everything is OK by re-connecting the board.