# Xilinx FPGA VC707

**URL:** <https://discourse.myriadrf.org/t/xilinx-fpga-vc707/75>\
**Category:** Reference Development Kit\
**Created:** [18 February 2014 09:42 UTC](https://discourse.myriadrf.org/t/xilinx-fpga-vc707/75 "2014-02-18T09:42:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jcc](https://avatars.discourse-cdn.com/v4/letter/j/a4c791/32.png) [@jcc](https://discourse.myriadrf.org/u/jcc)\
**Post date:** [18 February 2014 09:42 UTC](https://discourse.myriadrf.org/t/xilinx-fpga-vc707/75/1 "2014-02-18T09:42:28Z")

</div>

Hi All,  
I currently interested in Myriad and Zipper, but I am not sure that Zipper is compatible with XILINX VC707. Is anyone currently using the same FPGA with Zipper?  
And also I would like to know the TX and RX isolation. is the Myriad can reach at least 70dB?  
Thanks you advance.

---

<div class="post-metadata">

**Author:** ![andrewhux](https://avatars.discourse-cdn.com/v4/letter/a/d07c76/32.png) [@andrewhux](https://discourse.myriadrf.org/u/andrewhux)\
**Post date:** [18 February 2014 15:35 UTC](https://discourse.myriadrf.org/t/xilinx-fpga-vc707/75/2 "2014-02-18T15:35:56Z")

</div>

Hello JCC,

Zipper board has FMC connector which is a standard interface connector for all Xilinx development kits. So, yes it will be compatible with XILINX VC707.

Measured Tx to Rx isolation on Myriad RF board is \< 82 dB.

Andrew