# Wiki Error

**URL:** <https://discourse.myriadrf.org/t/wiki-error/4697>\
**Category:** General Discussion\
**Created:** [14 May 2019 18:56 UTC](https://discourse.myriadrf.org/t/wiki-error/4697 "2019-05-14T18:56:58Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![fredK1UU](https://avatars.discourse-cdn.com/v4/letter/f/8e8cbc/32.png) [@fredK1UU](https://discourse.myriadrf.org/u/fredK1UU)\
**Post date:** [14 May 2019 18:56 UTC](https://discourse.myriadrf.org/t/wiki-error/4697/1 "2019-05-14T18:56:58Z")

</div>

Please correct the GPIO table in the LimeSDR WIKI.

The table shows the GND on pin 1…GND is actually on pin 9.  
PWR is on pin 10  
GPIO0 is on pin 1  
GPIO1 is on pin 2  
etc.

I bought PCBs, stencils, parts based on the table. I either need to make a unsightly interface cable or re-layout the PCBs

Fred  
K1UU

---

<div class="post-metadata">

**Author:** ![Zack](https://yyz2.discourse-cdn.com/flex034/user_avatar/discourse.myriadrf.org/zack/32/89_2.png) [@Zack](https://discourse.myriadrf.org/u/Zack)\
**Post date:** [15 May 2019 08:04 UTC](https://discourse.myriadrf.org/t/wiki-error/4697/2 "2019-05-15T08:04:49Z")

</div>

Hi @fredK1UU,

Very sorry for this mistake! Thank you for pointing this out. Wiki fixed.

---

<div class="post-metadata">

**Author:** ![fredK1UU](https://avatars.discourse-cdn.com/v4/letter/f/8e8cbc/32.png) [@fredK1UU](https://discourse.myriadrf.org/u/fredK1UU)\
**Post date:** [15 May 2019 13:58 UTC](https://discourse.myriadrf.org/t/wiki-error/4697/3 "2019-05-15T13:58:40Z")

</div>

Thank you Zack! I modified my cable - all is well here.

Fred  
K1UU