Plans for Receive only board (suggestions needed)

[Crater]

We plan to use the RX1_L input with the EasyFIX2 applied.
Reading the schematics, we are not sure if RX1_L has a calibartion path using the SPDT switch.
If RX1_L is on the calibration path can we apply the mods described in the link below?

LimeSDR Mini and Spurious signal around 100 MHz

Hi, I want to share some mods that help reducing spurs (especially on 100Mhz) on limesdr-mini : first : increase C17, C18, C28 and C29 from 10pF to 10nF (values are not really critical) : these are decoupling capacitors for DC controlling voltages of RF switches (TX and RX) (sky13411). According to datasheet the typical value is 10pF to provide fastest switching speed (70ns). In lime-mini, we can increase these capacitors to higher values to provide better RF filtering. It seems that these …