Phase jumps while transmitting DC signal

[gwong]

Look here for the specific instructions to lock the SXR and SXT:

[LimeSDR-USB] Synchronization and Toggle TDD/FDD Mode

TDD mode for LMS7002M is activated via configuration. The idea is to use only one PLL (SXT) for both Rx and Tx chains. Here are steps on how to do it using LimeSuiteGUI: Starting setup is as a normal FDD mode (both RX and TX synthesizers are working). Set register 0x011C[6] = 0 while 0x0020[1:0] = 2 (or SXT tab is selected in LimeSuiteGUI - uncheck control check box called “LO buffer from SXT to SXR” under “Power down controls”). Set 0x011C[1] = 1 while 0x0020[1:0] = 1 (or SXR tab is selected…