# Missing posts

**URL:** <https://discourse.myriadrf.org/t/missing-posts/994>\
**Category:** Uncategorized\
**Created:** [23 March 2017 16:51 UTC](https://discourse.myriadrf.org/t/missing-posts/994 "2017-03-23T16:51:20Z")\
**Posts on this page:** 1\
**Showing post:** 14

<div class="post-metadata">

**Author:** ![jherbert](https://avatars.discourse-cdn.com/v4/letter/j/c67d28/32.png) [@jherbert](https://discourse.myriadrf.org/u/jherbert)\
**Post date:** [1 April 2017 07:38 UTC](https://discourse.myriadrf.org/t/missing-posts/994/14 "2017-04-01T07:38:44Z")

</div>

@Ramsin Yes, this seems to have been removed completely. In addition I am missing the later parts of the following:

> [@Request for assistance for good HF reception from 100 KHz to more than 30 MHz](https://discourse.myriadrf.org/t/request-for-assistance-for-good-hf-reception-from-100-khz-to-more-than-30-mhz/894):
>
> You, Myriad RF, major RF specialists, I allow you to make a request for assistance for me and surely many other people from the LimeSDR community Allow us to operate the LimeSDR in HF reception in good conditions instead of letting the SDR languish at the bottom of a closet. This would also be a very commercial and beneficial way for you not to let us down Objective: Allow to receive in very good conditions the spectrum HF from 100 KHz This only starts from the two entry points which are RX1…

> [@Where did the 100 KHz go?](https://discourse.myriadrf.org/t/where-did-the-100-khz-go/690):
>
> It is well specified and several times in your argument that the LimeSDR is intended for a hole less range from 100 KHz to 3.8 GHz There are 6 reception inputs currently the receipt entries are: RX1 L = 700 MHz - 900 MHz RX1 H = 2 GHz – 2,6 GHz RX1 W = 700 MHz – 2.6 GHz RX2 L = 700 MHz - 900 MHz RX2 H = 2 GHz – 2,6 GHz RX2 W = 700 MHz – 2,6 GHz Why not have planned RX1 L and RX2 L with beginnings of HF ranges of which one at 100 KHz? The input transformers RX1 L and R2X L are currently…

> [@HF settings](https://discourse.myriadrf.org/t/hf-settings/953):
>
> Cuba was booming last night @ 6.165MHz and 26.165MHz. with LPF only. Should be nothing heard @26MHz. Sent -73dBm signal (5 and 9 translation) to modified LNA\_L (EasyFix2) input using SDR Console v3.0 Preview. To get same reading( -73dBm) @ SDR Console v3.0 Preview following settings used: Settings: LNA PGA TIA Freq 1.92MHz -1 Max 0 3.65MHz -30 -3 -2 7.20MHz -30 -3 -12 14.2MHz -27 -12 -12 21.2MHz -27 -12 -12 28.2MHz -27 -12 -6 Separate observation: Eve…

I do not know how to look them up in Google cache - all I could find was a version of the site from yesterday.

I would really appreciate a clarification of community rules and issues that may not be discussed here. But then I believe this was just one unfortunate glitch.

---

_[View the full topic](https://discourse.myriadrf.org/t/missing-posts/994)._