# LMS7002M+ Xilinx FPGA board?

**URL:** <https://discourse.myriadrf.org/t/lms7002m-xilinx-fpga-board/1483>\
**Category:** Uncategorized\
**Created:** [19 July 2017 06:59 UTC](https://discourse.myriadrf.org/t/lms7002m-xilinx-fpga-board/1483 "2017-07-19T06:59:41Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![booth](https://avatars.discourse-cdn.com/v4/letter/b/848f3c/32.png) [@booth](https://discourse.myriadrf.org/u/booth)\
**Post date:** [19 July 2017 06:59 UTC](https://discourse.myriadrf.org/t/lms7002m-xilinx-fpga-board/1483/1 "2017-07-19T06:59:41Z")

</div>

Hi All,  
I have some Communication IP’s written for Xilinx IP’s (BPSK demodulator). I estimate that the Altera FPGA on the LIMESDR (USB and PCIe) has not enough space for such an implementation.  
Is there a board around which has the LimeMicro ASIC+ Xilinx FPGA on it?

Alternatively as the Communication IP’s just need I&Q and CLK(Sample Rate) is there a way to get I&Q out of the LIMESDR board?

Thank you

---

<div class="post-metadata">

**Author:** ![FFY00](https://yyz2.discourse-cdn.com/flex034/user_avatar/discourse.myriadrf.org/ffy00/32/1427_2.png) [@FFY00](https://discourse.myriadrf.org/u/FFY00)\
**Post date:** [19 July 2017 12:34 UTC](https://discourse.myriadrf.org/t/lms7002m-xilinx-fpga-board/1483/2 "2017-07-19T12:34:16Z")

</div>

You can do that virtually. You can get the IQ samples via USB.

---

<div class="post-metadata">

**Author:** ![andrewback](https://avatars.discourse-cdn.com/v4/letter/a/22d042/32.png) [@andrewback](https://discourse.myriadrf.org/u/andrewback)\
**Post date:** [19 July 2017 13:21 UTC](https://discourse.myriadrf.org/t/lms7002m-xilinx-fpga-board/1483/3 "2017-07-19T13:21:44Z")

</div>

The only solution I know of would be to use the [LMS7002M EVB (UNITE)](https://www.digikey.com/product-detail/en/lime-microsystems-ltd/UNITE7002/1434-1004-ND/5012881) board — which has an FMC interface — plugged into an appropriate Xilinx FPGA development board.

---

<div class="post-metadata">

**Author:** ![booth](https://avatars.discourse-cdn.com/v4/letter/b/848f3c/32.png) [@booth](https://discourse.myriadrf.org/u/booth)\
**Post date:** [19 July 2017 13:32 UTC](https://discourse.myriadrf.org/t/lms7002m-xilinx-fpga-board/1483/4 "2017-07-19T13:32:00Z")

</div>

I have found the XTRX board which has a Xilinx fpga but not sure if it is available.

---

<div class="post-metadata">

**Author:** ![booth](https://avatars.discourse-cdn.com/v4/letter/b/848f3c/32.png) [@booth](https://discourse.myriadrf.org/u/booth)\
**Post date:** [19 July 2017 13:33 UTC](https://discourse.myriadrf.org/t/lms7002m-xilinx-fpga-board/1483/5 "2017-07-19T13:33:35Z")

</div>

Yes but can you plug in the USB connector directly to a FPGA board?

---

<div class="post-metadata">

**Author:** ![FFY00](https://yyz2.discourse-cdn.com/flex034/user_avatar/discourse.myriadrf.org/ffy00/32/1427_2.png) [@FFY00](https://discourse.myriadrf.org/u/FFY00)\
**Post date:** [19 July 2017 21:46 UTC](https://discourse.myriadrf.org/t/lms7002m-xilinx-fpga-board/1483/6 "2017-07-19T21:46:52Z")

</div>

You can’t get the physical IQ signal out of LimeSDR but you can virtual samples up 60Mbps.