# LimeSuite.dll

**URL:** <https://discourse.myriadrf.org/t/limesuite-dll/5243>\
**Category:** System Development\
**Created:** [11 October 2019 08:43 UTC](https://discourse.myriadrf.org/t/limesuite-dll/5243 "2019-10-11T08:43:16Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Viczou](https://avatars.discourse-cdn.com/v4/letter/v/e36b37/32.png) [@Viczou](https://discourse.myriadrf.org/u/Viczou)\
**Post date:** [11 October 2019 08:43 UTC](https://discourse.myriadrf.org/t/limesuite-dll/5243/1 "2019-10-11T08:43:16Z")

</div>

Somebody have LimeSuite.dll 32bit, I can’t use 64bit’s. Thanks.

---

<div class="post-metadata">

**Author:** ![IgnasJ](https://avatars.discourse-cdn.com/v4/letter/i/278dde/32.png) [@IgnasJ](https://discourse.myriadrf.org/u/IgnasJ)\
**Post date:** [14 October 2019 07:08 UTC](https://discourse.myriadrf.org/t/limesuite-dll/5243/2 "2019-10-14T07:08:08Z")

</div>

Hi,  
here is a link to LimeSuite.dll (v19.04) compiled with MS Visual Studio 2015:  
[https://downloads.myriadrf.org/project/limesuite/19.04/LimeSuite19.04\_32bit.dll](https://downloads.myriadrf.org/project/limesuite/19.04/LimeSuite19.04_32bit.dll)

---

<div class="post-metadata">

**Author:** ![Viczou](https://avatars.discourse-cdn.com/v4/letter/v/e36b37/32.png) [@Viczou](https://discourse.myriadrf.org/u/Viczou)\
**Post date:** [15 October 2019 00:41 UTC](https://discourse.myriadrf.org/t/limesuite-dll/5243/3 "2019-10-15T00:41:30Z")

</div>

Hi, IgnasJ, thank you very much.

---

<div class="post-metadata">

**Author:** ![Viczou](https://avatars.discourse-cdn.com/v4/letter/v/e36b37/32.png) [@Viczou](https://discourse.myriadrf.org/u/Viczou)\
**Post date:** [18 October 2019 07:49 UTC](https://discourse.myriadrf.org/t/limesuite-dll/5243/4 "2019-10-18T07:49:13Z")

</div>

Hi, IgnasJ, useing LimeSuite1904\_32bit.dll in my Labview project has something problem, such as : I can’t get IQ data from LMS\_RecvStream, the data is 0. Pls help me.

---

<div class="post-metadata">

**Author:** ![IgnasJ](https://avatars.discourse-cdn.com/v4/letter/i/278dde/32.png) [@IgnasJ](https://discourse.myriadrf.org/u/IgnasJ)\
**Post date:** [18 October 2019 08:09 UTC](https://discourse.myriadrf.org/t/limesuite-dll/5243/5 "2019-10-18T08:09:58Z")

</div>

Hi,  
I am not familiar with the code that Matlab uses. What setup does it do before calling LMS\_RecvStream()?  
There should be at least:  
LMS\_Open()  
LMS\_Init() (or LMS\_LoadConfig())  
LMS\_SetupStream()  
LMS\_StartStream()

Normally you would also set frequency, gain, sample rate, etc… after LMS\_Init() [see [https://github.com/myriadrf/LimeSuite/blob/master/src/examples/basicRX.cpp](https://github.com/myriadrf/LimeSuite/blob/master/src/examples/basicRX.cpp)], but just to receive anything from SDR, defaults loaded by LMS\_Init() should work.

---

<div class="post-metadata">

**Author:** ![Viczou](https://avatars.discourse-cdn.com/v4/letter/v/e36b37/32.png) [@Viczou](https://discourse.myriadrf.org/u/Viczou)\
**Post date:** [18 October 2019 08:36 UTC](https://discourse.myriadrf.org/t/limesuite-dll/5243/6 "2019-10-18T08:36:11Z")

</div>

LMS\_Init() dosen’t need configure file?

---

<div class="post-metadata">

**Author:** ![IgnasJ](https://avatars.discourse-cdn.com/v4/letter/i/278dde/32.png) [@IgnasJ](https://discourse.myriadrf.org/u/IgnasJ)\
**Post date:** [18 October 2019 08:48 UTC](https://discourse.myriadrf.org/t/limesuite-dll/5243/7 "2019-10-18T08:48:44Z")

</div>

LMS\_Init() does not use config file. As you can see in basicRX example it only takes device handle as argument.  
If you want to load LMS settings from config (INI) file use LMS\_LoadConfig().

---

<div class="post-metadata">

**Author:** ![Viczou](https://avatars.discourse-cdn.com/v4/letter/v/e36b37/32.png) [@Viczou](https://discourse.myriadrf.org/u/Viczou)\
**Post date:** [18 October 2019 10:10 UTC](https://discourse.myriadrf.org/t/limesuite-dll/5243/8 "2019-10-18T10:10:19Z")

</div>

Dear IgnasJ, I followed your instructions, everything else is fine except “LMS\_RecvStream()”, when code runs to this, the Labview tool exit,