# LimeSuite - cannot connect - Westbrigde

**URL:** <https://discourse.myriadrf.org/t/limesuite-cannot-connect-westbrigde/1953>\
**Category:** LimeSDR\
**Created:** [1 November 2017 18:45 UTC](https://discourse.myriadrf.org/t/limesuite-cannot-connect-westbrigde/1953 "2017-11-01T18:45:21Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![ricardas](https://yyz2.discourse-cdn.com/flex034/user_avatar/discourse.myriadrf.org/ricardas/32/86_2.png) [@ricardas](https://discourse.myriadrf.org/u/ricardas)\
**Post date:** [8 November 2018 23:22 UTC](https://discourse.myriadrf.org/t/limesuite-cannot-connect-westbrigde/1953/8 "2018-11-08T23:22:43Z")

</div>

FX3 firmware needs to be programmed:

> [@Just trying to get started, having no luck](https://discourse.myriadrf.org/t/just-trying-to-get-started-having-no-luck/1127/13):
>
> Hello, If your board is displayed as “WestBridge” it means that FX3 was not able to boot from flash and FX3 bootloader is running. You can try programming FX3 manually from LimeSuiteGUI: “Options-\>connection settings” connect to device displayed as “WestBridge” Go to “Modules-\>programming” 2.1. select device: ‘FX3’, programming mode: “Firmware to RAM” 2.2. Click ‘Open’ button and select firmware file 2.3. Click ‘Program’ button 2.4. Re-connect to the board via “Options-\>Connection setti…

---

_[View the full topic](https://discourse.myriadrf.org/t/limesuite-cannot-connect-westbrigde/1953)._