# LimeSuite - cannot connect - Westbrigde

**URL:** <https://discourse.myriadrf.org/t/limesuite-cannot-connect-westbrigde/1953>\
**Category:** LimeSDR\
**Created:** [1 November 2017 18:45 UTC](https://discourse.myriadrf.org/t/limesuite-cannot-connect-westbrigde/1953 "2017-11-01T18:45:21Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![IgnasJ](https://avatars.discourse-cdn.com/v4/letter/i/278dde/32.png) [@IgnasJ](https://discourse.myriadrf.org/u/IgnasJ)\
**Post date:** [2 November 2017 07:28 UTC](https://discourse.myriadrf.org/t/limesuite-cannot-connect-westbrigde/1953/2 "2017-11-02T07:28:17Z")

</div>

Hi,  
this might help:

> [@Just trying to get started, having no luck](https://discourse.myriadrf.org/t/just-trying-to-get-started-having-no-luck/1127/13):
>
> Hello, If your board is displayed as “WestBridge” it means that FX3 was not able to boot from flash and FX3 bootloader is running. You can try programming FX3 manually from LimeSuiteGUI: “Options-\>connection settings” connect to device displayed as “WestBridge” Go to “Modules-\>programming” 2.1. select device: ‘FX3’, programming mode: “Firmware to RAM” 2.2. Click ‘Open’ button and select firmware file 2.3. Click ‘Program’ button 2.4. Re-connect to the board via “Options-\>Connection setti…

---

_[View the full topic](https://discourse.myriadrf.org/t/limesuite-cannot-connect-westbrigde/1953)._