# LimeSDR mini showing a wobbling with 50+MHz sampling rate and high-ish powered signals

**URL:** <https://discourse.myriadrf.org/t/limesdr-mini-showing-a-wobbling-with-50-mhz-sampling-rate-and-high-ish-powered-signals/3857>\
**Category:** LimeSDR\
**Created:** [14 December 2018 14:42 UTC](https://discourse.myriadrf.org/t/limesdr-mini-showing-a-wobbling-with-50-mhz-sampling-rate-and-high-ish-powered-signals/3857 "2018-12-14T14:42:47Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![daiaed](https://avatars.discourse-cdn.com/v4/letter/d/a698b9/32.png) [@daiaed](https://discourse.myriadrf.org/u/daiaed)\
**Post date:** [14 December 2018 14:42 UTC](https://discourse.myriadrf.org/t/limesdr-mini-showing-a-wobbling-with-50-mhz-sampling-rate-and-high-ish-powered-signals/3857/1 "2018-12-14T14:42:47Z")

</div>

Hello there

I might be crazy, but I believe I didn’t have this problem until a couple of days ago.

When using the limesdr mini above its rated bandwidth for fosphor I get a weird behaviour that can better be explained with a picture, see attached. Keeping the sampling frequency below 50 MHz everything works just fine (and as I said, I believe this only started happening recently).

Does anyone have any suggestions other than decreasing the sampling rate?

Thank you!

 ![Screenshot%20from%202018-12-14%2014-26-00](https://canada1.discourse-cdn.com/flex034/uploads/myriadrf/original/2X/7/743290a092bb8f93fc592a4651ea4b1c2fe0be1a.jpeg)