# LimeQuickTest fails with LimeSDR Mini 2.0

**URL:** https://discourse.myriadrf.org/t/limequicktest-fails-with-limesdr-mini-2-0/7821
**Category:** LimeSDR
**Created:** [10 February 2023 06:49 UTC](https://discourse.myriadrf.org/t/limequicktest-fails-with-limesdr-mini-2-0/7821 "2023-02-10T06:49:24Z")
**Posts on this page:** 1
**Showing post:** 6

<div class="post-metadata">

### Author: ![Mike-Duvall](https://avatars.discourse-cdn.com/v4/letter/m/439d5e/32.png) [@Mike-Duvall](https://discourse.myriadrf.org/u/Mike-Duvall)
#### Post date: [4 March 2023 01:00 UTC](https://discourse.myriadrf.org/t/limequicktest-fails-with-limesdr-mini-2-0/7821/6 "2023-03-04T01:00:38Z")

</div>

I just complied and installed the latest version. It fixed all but one of the failures. Now LNA\_W fails.

Here is the Limeutil --info

Version information:  
Library version: v22.09.1-g9c983d87  
Build timestamp: 2023-03-03  
Interface version: v2022.9.1  
Binary interface: 22.09-1

Here is the Quick test info. I assume from what AndrewBack was saying the problem is just the test limits for TX\_2 → LNA\_W. The SDR seemed to work fine with GQRX at 30M samples per second with the 22.09.0 version.

-\>Start time: Fri Mar 3 19:46:20 2023  
-\>LimeSuite version: 22.09.1-g9c983d87

-\>Device: LimeSDR Mini, media=USB 3.0, module=FT601, addr=24607:1027, serial=1D90F82CC924B8, HW=5, GW=2.1  
Serial Number: 1D90F82CC924B8  
Chip temperature: 25 C

[Clock Network Test]  
-\>REF clock test  
Test results: 31242; 34024; 36759 - PASSED  
-\>VCTCXO test  
Results : 6710932 (min); 6710966 (max) - PASSED  
-\>Clock Network Test PASSED

[FPGA EEPROM Test]  
-\>Read EEPROM  
FPGA EEPROM not supported in v2  
-\>FPGA EEPROM Test PASSED

[LMS7002M Test]  
-\>Perform Registers Test  
-\>External Reset line test  
Reg 0x20: Write value 0xFFFD, Read value 0xFFFD  
Reg 0x20: value after reset 0x0FFFF  
-\>LMS7002M Test PASSED

[RF Loopback Test]  
-\>Configure LMS  
-\>Run Tests (TX\_2 → LNA\_W):  
CH0 (SXR=1000.0MHz, SXT=1005.0MHz): Result:(-35.0 dBFS, 5.00 MHz) - FAILED  
-\>Run Tests (TX\_1 → LNA\_H):  
CH0 (SXR=2100.0MHz, SXT=2105.0MHz): Result:(-20.9 dBFS, 5.00 MHz) - PASSED  
-\>RF Loopback Test FAILED

=\> Board tests FAILED \<=

BTW I am running on Ubuntu 18.04. I don’t think that matters.

Thanks for all the hard work guys. The Lime Mini is a big step up for me. I am impressed with what I have learned so far.

---

_[View the full topic](https://discourse.myriadrf.org/t/limequicktest-fails-with-limesdr-mini-2-0/7821)._