# LimeNet Micro as a remote Transceiver

**URL:** <https://discourse.myriadrf.org/t/limenet-micro-as-a-remote-transceiver/5720>\
**Category:** General Discussion\
**Created:** [5 February 2020 05:20 UTC](https://discourse.myriadrf.org/t/limenet-micro-as-a-remote-transceiver/5720 "2020-02-05T05:20:11Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![9a4db](https://yyz2.discourse-cdn.com/flex034/user_avatar/discourse.myriadrf.org/9a4db/32/2675_2.png) [@9a4db](https://discourse.myriadrf.org/u/9a4db)\
**Post date:** [8 February 2020 16:12 UTC](https://discourse.myriadrf.org/t/limenet-micro-as-a-remote-transceiver/5720/2 "2020-02-08T16:12:08Z")

</div>

You can read on my experience on that subject here:

> [@Below 30Mhz on LimeSDR Mini - Full of garbage](https://discourse.myriadrf.org/t/below-30mhz-on-limesdr-mini-full-of-garbage/4777/26):
>
> Here some tips, who knows, may be useful to someone… Have here one LimeNET micro which was not used on primary intention. Assuming that RF part is similar to mini consider this approach: I was able to use on 7 MHz with Ron’s SDR Console all gain to max and LNA4ALL but that is only Win solution and no use of on board CM3. Therefore decided to try with Raspibian and Soapy Remote… Managed to install all that and find out that Cubic SDR is working on remote and SDRAngel crashing - the author…

So far able to use it on RX only.

---

_[View the full topic](https://discourse.myriadrf.org/t/limenet-micro-as-a-remote-transceiver/5720)._