# Lime-Mini Video. Calibration

**URL:** https://discourse.myriadrf.org/t/lime-mini-video-calibration/3920
**Category:** General Discussion
**Created:** [28 December 2018 20:10 UTC](https://discourse.myriadrf.org/t/lime-mini-video-calibration/3920 "2018-12-28T20:10:45Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![en1gma](https://avatars.discourse-cdn.com/v4/letter/e/f17d59/32.png) [@en1gma](https://discourse.myriadrf.org/u/en1gma)
#### Post date: [28 December 2018 20:10 UTC](https://discourse.myriadrf.org/t/lime-mini-video-calibration/3920/1 "2018-12-28T20:10:45Z")

</div>

Could someone make a video detailing the process of the calibration process?  
do we leave Tx and Rx open or terminated or should it be hooked up to the antenna we plan to use?

Any info on LimeSuiteGUI in the IQ area would also be great.

Cant believe we dont have any instructions that are clear on this process.

i have had my lime-mini for about 8 or 9 months and never done the calibrate process correctly and after reading several threads here it dont seem like very many people have done it correctly either.  
i never did any calibration process that took 8-10 hours

---

<div class="post-metadata">

### Author: ![andrewback](https://avatars.discourse-cdn.com/v4/letter/a/22d042/32.png) [@andrewback](https://discourse.myriadrf.org/u/andrewback)
#### Post date: [28 December 2018 20:31 UTC](https://discourse.myriadrf.org/t/lime-mini-video-calibration/3920/2 "2018-12-28T20:31:22Z")

</div>

Calibration is automatic and performed by the LMS7002M MCU using loopback.