# How to upload configured file in flash memory

**URL:** <https://discourse.myriadrf.org/t/how-to-upload-configured-file-in-flash-memory/1982>\
**Category:** LimeSDR\
**Created:** [9 November 2017 05:27 UTC](https://discourse.myriadrf.org/t/how-to-upload-configured-file-in-flash-memory/1982 "2017-11-09T05:27:32Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![random](https://avatars.discourse-cdn.com/v4/letter/r/57b2e6/32.png) [@random](https://discourse.myriadrf.org/u/random)\
**Post date:** [9 November 2017 05:27 UTC](https://discourse.myriadrf.org/t/how-to-upload-configured-file-in-flash-memory/1982/1 "2017-11-09T05:27:32Z")

</div>

Dear All  
i want to store NIOS ii MCU configuration file in flash memory i used quartus prime software to build and compile NIOS MCU application file i know that through usb blaster i can configure flash memory but i just want to know is there any other method to this task because currently i don’t have usb blaster

---

<div class="post-metadata">

**Author:** ![Zero](https://avatars.discourse-cdn.com/v4/letter/z/a88e57/32.png) [@Zero](https://discourse.myriadrf.org/u/Zero)\
**Post date:** [14 November 2017 11:45 UTC](https://discourse.myriadrf.org/t/how-to-upload-configured-file-in-flash-memory/1982/2 "2017-11-14T11:45:05Z")

</div>

Assuming that you’re using the USB Lime, you can use LimeUtil:

LimeUtil --fpga=“filename”

That will flash the ‘rbt’ file to the memory on the board.