# Happy days are here again - LimeSDR lives in HF!

**URL:** https://discourse.myriadrf.org/t/happy-days-are-here-again-limesdr-lives-in-hf/725
**Category:** LimeSDR
**Created:** [11 February 2017 02:06 UTC](https://discourse.myriadrf.org/t/happy-days-are-here-again-limesdr-lives-in-hf/725 "2017-02-11T02:06:30Z")
**Posts on this page:** 1
**Showing post:** 63

<div class="post-metadata">

### Author: ![martywittrock](https://yyz2.discourse-cdn.com/flex034/user_avatar/discourse.myriadrf.org/martywittrock/32/66_2.png) [@martywittrock](https://discourse.myriadrf.org/u/martywittrock)
#### Post date: [13 February 2017 21:59 UTC](https://discourse.myriadrf.org/t/happy-days-are-here-again-limesdr-lives-in-hf/725/63 "2017-02-13T21:59:34Z")

</div>

@LY2SS,

While you’re setting up your other machine, please check out this thread and the messages below it:

> [@So, how about the Wideband Port - How's it look modified..?](https://discourse.myriadrf.org/t/so-how-about-the-wideband-port-hows-it-look-modified/743/7):
>
> I did the RX1\_W mod too and getting acceptable signals above 3 MHz. The insane thing is the analog bandwidth setting 100 MHz… I hope Josh can figure this one out grinning [image] [image]

It’s likely that you have to set your Bandwidth in GQRX to 60 MHz to have the lower end frequencies to show up - it’s a bug in the SoapySDR code, not GQRX. But it’s good that you’re setting up SDRConsole on your Win7 machine to balance between the two applications with your LimeSDR.

Let me know if you need anything else on this -

73 de Marty, KN0CK

---

_[View the full topic](https://discourse.myriadrf.org/t/happy-days-are-here-again-limesdr-lives-in-hf/725)._