# Happy days are here again - LimeSDR lives in HF!

**URL:** <https://discourse.myriadrf.org/t/happy-days-are-here-again-limesdr-lives-in-hf/725>\
**Category:** LimeSDR\
**Created:** [11 February 2017 02:06 UTC](https://discourse.myriadrf.org/t/happy-days-are-here-again-limesdr-lives-in-hf/725 "2017-02-11T02:06:30Z")\
**Posts on this page:** 1\
**Showing post:** 26

<div class="post-metadata">

**Author:** ![csete](https://yyz2.discourse-cdn.com/flex034/user_avatar/discourse.myriadrf.org/csete/32/3326_2.png) [@csete](https://discourse.myriadrf.org/u/csete)\
**Post date:** [11 February 2017 09:07 UTC](https://discourse.myriadrf.org/t/happy-days-are-here-again-limesdr-lives-in-hf/725/26 "2017-02-11T09:07:45Z")

</div>

Well, it “works” for me after the mod using gqrx. However, I found that setting the bandwidth to 0 does not seem to select the best bandwidth, at least not from a sensitivity point of view.

The screenshot below shows 10 Msps first using 0 MHz bandwidth then 10 MHz bandwidth.

 ![](https://canada1.discourse-cdn.com/flex034/uploads/myriadrf/original/1X/15a725fe1e98d732100cd2aee0eb06051168aa8f.png)

I only did the super-easy mod by @sdr_research - thanks 🙂

PS: This is on a v1.2 board, but there shouldn’t be any difference, right?

---

_[View the full topic](https://discourse.myriadrf.org/t/happy-days-are-here-again-limesdr-lives-in-hf/725)._