# GQRX Output 1 Not Connected Internally

**URL:** <https://discourse.myriadrf.org/t/gqrx-output-1-not-connected-internally/2967>\
**Category:** Uncategorized\
**Created:** [28 June 2018 22:06 UTC](https://discourse.myriadrf.org/t/gqrx-output-1-not-connected-internally/2967 "2018-06-28T22:06:18Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![Ken98045](https://avatars.discourse-cdn.com/v4/letter/k/e36b37/32.png) [@Ken98045](https://discourse.myriadrf.org/u/Ken98045)\
**Post date:** [2 July 2018 16:58 UTC](https://discourse.myriadrf.org/t/gqrx-output-1-not-connected-internally/2967/3 "2018-07-02T16:58:56Z")

</div>

The output is the default audio device, the speaker. I let GQRX just go with the default, but I have tried changing it to see if that made a difference. It didn’t.

I installed everything GQRX/Soapy related using the following link. [Howto install: Gqrx Gnuradio Soapysdr Pothosware Limesuite on ubuntu](https://discourse.myriadrf.org/t/howto-install-gqrx-gnuradio-soapysdr-pothosware-limesuite-on-ubuntu/2402). I have been successful using these steps on another machine. However, it is possible that those steps are out of date by now.

I’ll try deleting the config file when I have a chance to re-boot into Linux. I’m stuck in  
Windows for a day to two due to other projects.

Thanks for the reply!

---

_[View the full topic](https://discourse.myriadrf.org/t/gqrx-output-1-not-connected-internally/2967)._