# Configuration Myriad-RF (STREAM) with xilinx on ubuntu linux system

**URL:** <https://discourse.myriadrf.org/t/configuration-myriad-rf-stream-with-xilinx-on-ubuntu-linux-system/240>\
**Category:** Uncategorized\
**Created:** [23 December 2015 15:20 UTC](https://discourse.myriadrf.org/t/configuration-myriad-rf-stream-with-xilinx-on-ubuntu-linux-system/240 "2015-12-23T15:20:48Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![mohammed](https://avatars.discourse-cdn.com/v4/letter/m/13edae/32.png) [@mohammed](https://discourse.myriadrf.org/u/mohammed)\
**Post date:** [23 December 2015 15:20 UTC](https://discourse.myriadrf.org/t/configuration-myriad-rf-stream-with-xilinx-on-ubuntu-linux-system/240/1 "2015-12-23T15:20:48Z")

</div>

Hi …  
recently , I purchased your Myriad-RF board (STREAM) , and I will connect this board with xilinux borad …

can you please give me guide how to start ??

I hope to tell me if configuration will be available for ubuntu O.S

thanks

---

<div class="post-metadata">

**Author:** ![andrewback](https://avatars.discourse-cdn.com/v4/letter/a/22d042/32.png) [@andrewback](https://discourse.myriadrf.org/u/andrewback)\
**Post date:** [4 January 2016 13:56 UTC](https://discourse.myriadrf.org/t/configuration-myriad-rf-stream-with-xilinx-on-ubuntu-linux-system/240/2 "2016-01-04T13:56:59Z")

</div>

Hi Mohammed,

Since STREAM is an FPGA development board, I’m not sure how you intend to connect it to another one and you would need to work out the design and supporting software yourself.

Drivers are being worked on that will enable you to use STREAM together with either the [Myriad-RF 1](https://myriadrf.org/projects/rdk/) or [UNITE7002](http://www.digikey.co.uk/product-detail/en/UNITE7002/1434-1004-ND/5012881) board, to give you a USB 3.0 attached SDR peripheral. This configuration would be supported under Ubuntu.

Regards,

Andrew