# Case for the LMS8001

**URL:** <https://discourse.myriadrf.org/t/case-for-the-lms8001/4835>\
**Category:** LMS8001 Companion\
**Created:** [15 June 2019 05:17 UTC](https://discourse.myriadrf.org/t/case-for-the-lms8001/4835 "2019-06-15T05:17:35Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![roach](https://avatars.discourse-cdn.com/v4/letter/r/ee7513/32.png) [@roach](https://discourse.myriadrf.org/u/roach)\
**Post date:** [15 June 2019 05:17 UTC](https://discourse.myriadrf.org/t/case-for-the-lms8001/4835/1 "2019-06-15T05:17:35Z")

</div>

I recently got a 3D printer and decided a case for the LMS8001 would be a good idea.

I think it came out great and I’ve put it up on thingiverse at

> **[LMS8001 case by roach118](https://www.thingiverse.com/thing:3690660)**
>
> If you happen to own the LMS8001 companion board you'll know it was only supplied as a PCB. 
> This case allows you to safely mount the PCB, U.FL to SMA leads and even install a DC jack. This case should allow you to get a lot of utility out of your...

Let me know if you print one or have any suggestions for a V2.

---

<div class="post-metadata">

**Author:** ![ccsh](https://avatars.discourse-cdn.com/v4/letter/c/3be4f8/32.png) [@ccsh](https://discourse.myriadrf.org/u/ccsh)\
**Post date:** [15 June 2019 08:16 UTC](https://discourse.myriadrf.org/t/case-for-the-lms8001/4835/2 "2019-06-15T08:16:11Z")

</div>

Looks great! Do you plan to create some more and sell them e.g. on eBay? 😛 Coz I would buy two, for sure 😉

---

<div class="post-metadata">

**Author:** ![roach](https://avatars.discourse-cdn.com/v4/letter/r/ee7513/32.png) [@roach](https://discourse.myriadrf.org/u/roach)\
**Post date:** [15 June 2019 09:17 UTC](https://discourse.myriadrf.org/t/case-for-the-lms8001/4835/3 "2019-06-15T09:17:11Z")

</div>

I wasn’t planning on it, but the good news is I don’t have to.

A quick check on “print a thing” (on demand 3D printing service) had a quote for ~$30 delivered

The STL file can be downloaded from thingiverse and you can find a local 3D printing service or hacker space and have it printed for you.

Just search “on demand 3D printing” and I’m sure something local will pop up

---

<div class="post-metadata">

**Author:** ![ccsh](https://avatars.discourse-cdn.com/v4/letter/c/3be4f8/32.png) [@ccsh](https://discourse.myriadrf.org/u/ccsh)\
**Post date:** [15 June 2019 13:14 UTC](https://discourse.myriadrf.org/t/case-for-the-lms8001/4835/4 "2019-06-15T13:14:01Z")

</div>

Great, thanks!