# LimeSDR

**URL:** https://discourse.myriadrf.org/c/projects/limesdr/21.md?page=2

[Latest](https://discourse.myriadrf.org/latest.md) · [Categories](https://discourse.myriadrf.org/categories.md)

**Page:** 3

---

## [LimeSDR XTRX (v1.3) via USB to Laptop](https://discourse.myriadrf.org/t/limesdr-xtrx-v1-3-via-usb-to-laptop/13068)

<div class="topic-metadata">

**Author:** [@Khyaati](https://discourse.myriadrf.org/u/Khyaati)\
**Replies:** 3\
**Last updated:** [12 March 2026 12:45 UTC](https://discourse.myriadrf.org/t/limesdr-xtrx-v1-3-via-usb-to-laptop/13068 "2026-03-12T12:45:32Z")

</div>

Hi All, I am currently working with the LimeSDR XTRX (v1.3) and would like some guidance on getting started. Based on my current understanding, the board can be powered and programmed by using the following interfaces: …

---

## [Usb2.0 interface on XTRX](https://discourse.myriadrf.org/t/usb2-0-interface-on-xtrx/13065)

<div class="topic-metadata">

**Author:** [@tsho](https://discourse.myriadrf.org/u/tsho)\
**Replies:** 1\
**Last updated:** [9 March 2026 10:46 UTC](https://discourse.myriadrf.org/t/usb2-0-interface-on-xtrx/13065 "2026-03-09T10:46:39Z")

</div>

Hello all, I had a question on the line XTRX. The usb2.0 interface on the pcie connector pin 38/36. Can I connect that usb 2.0 interface to a host system and then to gnuradio (or similar) via the usb connection? is …

---

## [LimeSDR XTRX v1.3 Reference Clock and PPS](https://discourse.myriadrf.org/t/limesdr-xtrx-v1-3-reference-clock-and-pps/13045)

<div class="topic-metadata">

**Author:** [@mind](https://discourse.myriadrf.org/u/mind)\
**Replies:** 12\
**Last updated:** [5 March 2026 22:41 UTC](https://discourse.myriadrf.org/t/limesdr-xtrx-v1-3-reference-clock-and-pps/13045 "2026-03-05T22:41:23Z")

</div>

Hi! I have a limeSDR XTRX v1.3 and would like to use an external 10MHz clock and the GPS antenna for PPS. Can please someone provide the information or link to the documentation if this is even possible? Really these a…

---

## [LimeSDR XTRX not found while listed on lspci](https://discourse.myriadrf.org/t/limesdr-xtrx-not-found-while-listed-on-lspci/13044)

<div class="topic-metadata">

**Author:** [@lp6764](https://discourse.myriadrf.org/u/lp6764)\
**Replies:** 7\
**Last updated:** [26 February 2026 16:40 UTC](https://discourse.myriadrf.org/t/limesdr-xtrx-not-found-while-listed-on-lspci/13044 "2026-02-26T16:40:20Z")

</div>

Hi, I’m setting up limesdr xtrx to work with embedded debian 12. I’ve downloaded limesuite through apt and when I use “limeDevice” it returns “No devices found”. I’ve checked out dmesg messages and link was set up, and …

---

## [Issue combining LimeSDR Mini v1 with the latest Windows D3XX Drivers](https://discourse.myriadrf.org/t/issue-combining-limesdr-mini-v1-with-the-latest-windows-d3xx-drivers/12955)

<div class="topic-metadata">

**Author:** [@ShoppingCartographer](https://discourse.myriadrf.org/u/ShoppingCartographer)\
**Replies:** 3\
**Last updated:** [26 February 2026 09:28 UTC](https://discourse.myriadrf.org/t/issue-combining-limesdr-mini-v1-with-the-latest-windows-d3xx-drivers/12955 "2026-02-26T09:28:01Z")

</div>

Recently had issues getting my LimeSDR Mini working on on two separate Windows machines, one on 10 and the other on 11, both with the latest FTDI D3XX driver. Neither one showed the LimeSDR in LimeUtil or LimeSuite. Even…

---

## [How to Reduce TX/RX DC Offset in LimeSDR Mini 2.4 (Compared to USRP)?](https://discourse.myriadrf.org/t/how-to-reduce-tx-rx-dc-offset-in-limesdr-mini-2-4-compared-to-usrp/13046)

<div class="topic-metadata">

**Author:** [@Kushal1](https://discourse.myriadrf.org/u/Kushal1)\
**Replies:** 14\
**Last updated:** [26 February 2026 09:06 UTC](https://discourse.myriadrf.org/t/how-to-reduce-tx-rx-dc-offset-in-limesdr-mini-2-4-compared-to-usrp/13046 "2026-02-26T09:06:18Z")

</div>

Hello everyone, I would like to understand how to reduce the TX and RX DC offset (LO leakage) in the LimeSDR Mini 2.4. I am running a simple cosine wave loopback experiment using GNU Radio (gr-limesdr 3.10 plugin). Fro…

---

## [Sync both TXs in LimeSDR USB](https://discourse.myriadrf.org/t/sync-both-txs-in-limesdr-usb/13033)

<div class="topic-metadata">

**Author:** [@andrebarrancos](https://discourse.myriadrf.org/u/andrebarrancos)\
**Replies:** 1\
**Last updated:** [20 February 2026 16:51 UTC](https://discourse.myriadrf.org/t/sync-both-txs-in-limesdr-usb/13033 "2026-02-20T16:51:30Z")

</div>

Hi, Im using limeSDR USB with soapySDR and limesuiteNG. Im trying to change the phase between my two Tx channels. fs = 5e6 freq = 80e6 tx\_gain = 55 tx\_chans = \[0, 1\] sdr = SoapySDR.Device() for ch in tx\_chans: s…

---

## [Capturing Inductive Telemetry 175khz frq with limeSDR usb](https://discourse.myriadrf.org/t/capturing-inductive-telemetry-175khz-frq-with-limesdr-usb/13049)

<div class="topic-metadata">

**Author:** [@ajforrf](https://discourse.myriadrf.org/u/ajforrf)\
**Replies:** 3\
**Last updated:** [20 February 2026 11:45 UTC](https://discourse.myriadrf.org/t/capturing-inductive-telemetry-175khz-frq-with-limesdr-usb/13049 "2026-02-20T11:45:22Z")

</div>

Hi Team, I am attempting to capture a 175 kHz signal using the LimeSDR USB. I connected a coil loop antenna (the same one used in our patient connector device for transmitting and receiving at 175 kHz). Although the Li…

---

## [LimeSDR XTRX V1.3 - Tx, Rx, CLK, PPS, and GNSS](https://discourse.myriadrf.org/t/limesdr-xtrx-v1-3-tx-rx-clk-pps-and-gnss/13050)

<div class="topic-metadata">

**Author:** [@DJ03](https://discourse.myriadrf.org/u/DJ03)\
**Replies:** 1\
**Last updated:** [19 February 2026 07:44 UTC](https://discourse.myriadrf.org/t/limesdr-xtrx-v1-3-tx-rx-clk-pps-and-gnss/13050 "2026-02-19T07:44:00Z")

</div>

LimeSDR XTRX V1.3 received… I need an advise what to do about the RF Ports (Tx, Rx, GNSS, PPS) and CLK. I understand I need to connect an all the antennae. Do I need to soldier a connector like a take out. This is so ti…

---

## [LimeSuiteNG version for LimeSDR\_GW v3.5 with XTRX on LimeFEA mPCIe](https://discourse.myriadrf.org/t/limesuiteng-version-for-limesdr-gw-v3-5-with-xtrx-on-limefea-mpcie/13029)

<div class="topic-metadata">

**Author:** [@IainCC](https://discourse.myriadrf.org/u/IainCC)\
**Replies:** 19\
**Last updated:** [18 February 2026 14:13 UTC](https://discourse.myriadrf.org/t/limesuiteng-version-for-limesdr-gw-v3-5-with-xtrx-on-limefea-mpcie/13029 "2026-02-18T14:13:14Z")

</div>

What version of LimeSuiteNG should I be using with LimeSDR\_GW v3.5? The documentation isn’t exactly clear which versions of the various bits should be getting combined to make a working system. I’m assuming LimeSDR\_GW i…

---

## [LimeSDR XTRX device not found and board version confusion](https://discourse.myriadrf.org/t/limesdr-xtrx-device-not-found-and-board-version-confusion/13043)

<div class="topic-metadata">

**Author:** [@lp6764](https://discourse.myriadrf.org/u/lp6764)\
**Replies:** 0\
**Last updated:** [10 February 2026 14:42 UTC](https://discourse.myriadrf.org/t/limesdr-xtrx-device-not-found-and-board-version-confusion/13043 "2026-02-10T14:42:34Z")

</div>

Hi there, I have a problem with detecting one of my limesdr boards using lspci / limeDevice etc. While looking for the solution I saw other post with similar issue XTRX not found - #11 by ricardas , the board version ch…

---

## [Low Rx signal from Tx using XTRX with gr-limesuiteng](https://discourse.myriadrf.org/t/low-rx-signal-from-tx-using-xtrx-with-gr-limesuiteng/8835)

<div class="topic-metadata">

**Author:** [@aardric](https://discourse.myriadrf.org/u/aardric)\
**Replies:** 8\
**Last updated:** [8 February 2026 17:10 UTC](https://discourse.myriadrf.org/t/low-rx-signal-from-tx-using-xtrx-with-gr-limesuiteng/8835 "2026-02-08T17:10:56Z")

</div>

Using cables and RF switches to interconnect the LimeSDR USB and XTRX Tx to Rx RF ports, and gnuradio selector blocks to select active base band paths (independent of RF path) I find that the USB device can be received b…

---

## [Lime SDR XTRX external clock source HW layout](https://discourse.myriadrf.org/t/lime-sdr-xtrx-external-clock-source-hw-layout/13041)

<div class="topic-metadata">

**Author:** [@chaloz](https://discourse.myriadrf.org/u/chaloz)\
**Replies:** 1\
**Last updated:** [7 February 2026 17:51 UTC](https://discourse.myriadrf.org/t/lime-sdr-xtrx-external-clock-source-hw-layout/13041 "2026-02-07T17:51:32Z")

</div>

Hi, I have been looking at the LimeSDR XTRX HW schematic for external clock feed on X7 U.FL connector, and I’m confused as to how is this separated from LMK00105’s CLKOUT3 signal which goes right back to X7 U.FL through…

---

## [Time-synced TX stream start hazard with LimeSDR\_GW](https://discourse.myriadrf.org/t/time-synced-tx-stream-start-hazard-with-limesdr-gw/13039)

<div class="topic-metadata">

**Author:** [@bl4h4j](https://discourse.myriadrf.org/u/bl4h4j)\
**Replies:** 3\
**Last updated:** [7 February 2026 08:44 UTC](https://discourse.myriadrf.org/t/time-synced-tx-stream-start-hazard-with-limesdr-gw/13039 "2026-02-07T08:44:30Z")

</div>

I’m trying to do external triggered TX stream start on an XTRX rev 1.2 with fresh Litex based gateware. Previous gateware versions were also tested, going back to v4 (dec. 4) and v5, they show the same issue. Versions: …

---

## [Soapy LimeSDR (LimeSuite Classic plugin): Single-Shot File Transfer Data Loss and Incorrect Reconfiguration When Switching Bands](https://discourse.myriadrf.org/t/soapy-limesdr-limesuite-classic-plugin-single-shot-file-transfer-data-loss-and-incorrect-reconfiguration-when-switching-bands/13026)

<div class="topic-metadata">

**Author:** [@Kushal1](https://discourse.myriadrf.org/u/Kushal1)\
**Replies:** 3\
**Last updated:** [3 February 2026 13:22 UTC](https://discourse.myriadrf.org/t/soapy-limesdr-limesuite-classic-plugin-single-shot-file-transfer-data-loss-and-incorrect-reconfiguration-when-switching-bands/13026 "2026-02-03T13:22:56Z")

</div>

Hello everyone, We are implementing packet-based file transfer using LimeSDR Mini 2.4, entirely in GNU Radio with Soapy LimeSDR source and sink blocks (LimeSuite Classic), and are observing severe and consistent data lo…

---

## [LimeRFE support on GNU Radio 3.10](https://discourse.myriadrf.org/t/limerfe-support-on-gnu-radio-3-10/13012)

<div class="topic-metadata">

**Author:** [@hb9dug2026](https://discourse.myriadrf.org/u/hb9dug2026)\
**Replies:** 14\
**Last updated:** [16 January 2026 20:19 UTC](https://discourse.myriadrf.org/t/limerfe-support-on-gnu-radio-3-10/13012 "2026-01-16T20:19:23Z")

</div>

I installed from source (master branch) gr-limesdr to get support for my RFE board on GNU Radio 3.10. GRC shows LimeSuite Sink and LimeSuite Rx but LimeRFE Controler is missing. On older GNU Radio versions, the block wa…

---

## [LimeSDR XTRX rev 1.3](https://discourse.myriadrf.org/t/limesdr-xtrx-rev-1-3/12994)

<div class="topic-metadata">

**Author:** [@aardric](https://discourse.myriadrf.org/u/aardric)\
**Replies:** 7\
**Last updated:** [15 January 2026 09:21 UTC](https://discourse.myriadrf.org/t/limesdr-xtrx-rev-1-3/12994 "2026-01-15T09:21:17Z")

</div>

This is only a query for curiosity at this point. What is the status (or roadmap) of the XTRX v1.3 board?

---

## [BOM for LimeSDR XTRX](https://discourse.myriadrf.org/t/bom-for-limesdr-xtrx/12996)

<div class="topic-metadata">

**Author:** [@aardric](https://discourse.myriadrf.org/u/aardric)\
**Replies:** 1\
**Last updated:** [30 December 2025 18:43 UTC](https://discourse.myriadrf.org/t/bom-for-limesdr-xtrx/12996 "2025-12-30T18:43:24Z")

</div>

Are BOMs still available on line for the limeSDR XTRX v1.2 1nd v1.3? I found them in the past but haven’t had much luck this time.

---

## [Fairwaves XTRX Rev. 4 use with new gateware and Lime Suite NG](https://discourse.myriadrf.org/t/fairwaves-xtrx-rev-4-use-with-new-gateware-and-lime-suite-ng/8289)

<div class="topic-metadata">

**Author:** [@dchard](https://discourse.myriadrf.org/u/dchard)\
**Replies:** 14\
**Last updated:** [13 December 2025 18:59 UTC](https://discourse.myriadrf.org/t/fairwaves-xtrx-rev-4-use-with-new-gateware-and-lime-suite-ng/8289 "2025-12-13T18:59:30Z")

</div>

@ricardas sorry to annoy you with this. There is a large XTRX rev.4 userbase (myself included), and I am trying to forward the cause by willing to test the new GW on these units. Theoretically, the only difference betwe…

---

## [LMS7002M issue with close Tx-/Rx-frequency](https://discourse.myriadrf.org/t/lms7002m-issue-with-close-tx-rx-frequency/12982)

<div class="topic-metadata">

**Author:** [@alex\_nagel](https://discourse.myriadrf.org/u/alex_nagel)\
**Replies:** 1\
**Last updated:** [12 December 2025 11:00 UTC](https://discourse.myriadrf.org/t/lms7002m-issue-with-close-tx-rx-frequency/12982 "2025-12-12T11:00:27Z")

</div>

we currently face a problem with the LMS7000m chip when we use Tx- and Rx- for a channel where we have a slight frequency offset (e.g. 5 kHz offset between Tx and Rx). We can reproduce the issue with the Lime suite and …

---

## [LimeSDR USB with Raspberry Pi 4](https://discourse.myriadrf.org/t/limesdr-usb-with-raspberry-pi-4/5421)

<div class="topic-metadata">

**Author:** [@richardwu1](https://discourse.myriadrf.org/u/richardwu1)\
**Replies:** 7\
**Last updated:** [12 December 2025 03:16 UTC](https://discourse.myriadrf.org/t/limesdr-usb-with-raspberry-pi-4/5421 "2025-12-12T03:16:52Z")

</div>

Hi guys, I’ve been trying for weeks now to get my LimeSDR USB working with my Raspberry Pi 4. I’ve tried various OS (Raspbian, Ubuntu 18.04) to get the LimeSuite and GNU Radio, but the Pi always seems to crash when inst…

---

## [LIME SDR XTRX with Rasp Pi CM4](https://discourse.myriadrf.org/t/lime-sdr-xtrx-with-rasp-pi-cm4/12979)

<div class="topic-metadata">

**Author:** [@iamfarazahmad](https://discourse.myriadrf.org/u/iamfarazahmad)\
**Replies:** 0\
**Last updated:** [12 December 2025 02:58 UTC](https://discourse.myriadrf.org/t/lime-sdr-xtrx-with-rasp-pi-cm4/12979 "2025-12-12T02:58:11Z")

</div>

Hello everyone, I am planning to use LIME SDR XTRX for Satellite onboard transmission; I need to send some AX.25 encoded packets from Rasp Pi CM4, but there is no documentation on how to do. Can anyone help?

---

## [LimeSDR Mini 2.0: Issues After Upgrading Gateware to v3.4](https://discourse.myriadrf.org/t/limesdr-mini-2-0-issues-after-upgrading-gateware-to-v3-4/12965)

<div class="topic-metadata">

**Author:** [@osqzss](https://discourse.myriadrf.org/u/osqzss)\
**Replies:** 11\
**Last updated:** [2 December 2025 10:18 UTC](https://discourse.myriadrf.org/t/limesdr-mini-2-0-issues-after-upgrading-gateware-to-v3-4/12965 "2025-12-02T10:18:13Z")

</div>

I noticed that the gateware version on my LimeSDR Mini 2.0 was quite old, so I upgraded it to the latest version (3.4) from the LimeSDR\_GW GitHub repository using the limeFlash CLI. The upgrade itself completed successf…

---

## [LimeSDR XTRX GW build errors](https://discourse.myriadrf.org/t/limesdr-xtrx-gw-build-errors/12968)

<div class="topic-metadata">

**Author:** [@lp6764](https://discourse.myriadrf.org/u/lp6764)\
**Replies:** 2\
**Last updated:** [28 November 2025 08:48 UTC](https://discourse.myriadrf.org/t/limesdr-xtrx-gw-build-errors/12968 "2025-11-28T08:48:26Z")

</div>

Hi, I’ve been trying to build FPGA gateware for LimeSDR XTRX and got “ ‘ghdl\_u\_sync\_hs\_ack’ is an unknown type \[LimeSDR\_GW/gateware/LimePPSDO/src/build/ppsdo/vhd2v/vctcxo\_tamer.v\]”. This occures after Vivado is running…

---

## [Regarding Faulty LimeRFE](https://discourse.myriadrf.org/t/regarding-faulty-limerfe/12962)

<div class="topic-metadata">

**Author:** [@bahari](https://discourse.myriadrf.org/u/bahari)\
**Replies:** 2\
**Last updated:** [21 November 2025 15:59 UTC](https://discourse.myriadrf.org/t/regarding-faulty-limerfe/12962 "2025-11-21T15:59:03Z")

</div>

Recently I has done a terrible mistake. I put a wrong power supply connector to my LimeRFE. I have 2 PSU connector for my 2 LimeRFE. I accidentally put a wrong connector with a wrong 12VDC polarity. After I realize it (…

---

## [XTRX v.1.3 sampling rate](https://discourse.myriadrf.org/t/xtrx-v-1-3-sampling-rate/8882)

<div class="topic-metadata">

**Author:** [@vinsongo](https://discourse.myriadrf.org/u/vinsongo)\
**Replies:** 2\
**Last updated:** [20 November 2025 13:37 UTC](https://discourse.myriadrf.org/t/xtrx-v-1-3-sampling-rate/8882 "2025-11-20T13:37:21Z")

</div>

I would like to use the XTRX v.1.3 with 2 Rx and 1 Tx. The maximum sampling rates for Rx is a little confusing. In this link: Lime Microsystems | LimeSDR XTRX, it says for SISO, the sampling rate is 120 MSps with a ba…

---

## [LimeSDR mini 2 on windows 11](https://discourse.myriadrf.org/t/limesdr-mini-2-on-windows-11/8270)

<div class="topic-metadata">

**Author:** [@john2](https://discourse.myriadrf.org/u/john2)\
**Replies:** 4\
**Last updated:** [4 November 2025 12:25 UTC](https://discourse.myriadrf.org/t/limesdr-mini-2-on-windows-11/8270 "2025-11-04T12:25:01Z")

</div>

Hi, New to this. Trying to setup a Lime SDR Mini 2 on Windows 11 system, current updates. Per the directions in loading the FT601 driver it will not load, either via the install file or using the FTD3XXDriver\_WHQLCert…

---

## [Reproducible Cold Start?](https://discourse.myriadrf.org/t/reproducible-cold-start/12952)

<div class="topic-metadata">

**Author:** [@oe1rsa](https://discourse.myriadrf.org/u/oe1rsa)\
**Replies:** 5\
**Last updated:** [27 October 2025 15:54 UTC](https://discourse.myriadrf.org/t/reproducible-cold-start/12952 "2025-10-27T15:54:41Z")

</div>

I am having problems with the cold start of a Lime Mini 2. Unfortunately the circumstances are hard to describe and I cannot come up with a minimal example. Perhaps also I am overlooking something that is obvious for oth…

---

## [Unavailability of a component from the LimeSDR-Mini\_2v4 BOM](https://discourse.myriadrf.org/t/unavailability-of-a-component-from-the-limesdr-mini-2v4-bom/12951)

<div class="topic-metadata">

**Author:** [@Madhu129](https://discourse.myriadrf.org/u/Madhu129)\
**Replies:** 5\
**Last updated:** [27 October 2025 04:25 UTC](https://discourse.myriadrf.org/t/unavailability-of-a-component-from-the-limesdr-mini-2v4-bom/12951 "2025-10-27T04:25:44Z")

</div>

Hello everyone, While reviewing the LimeSDR-Mini\_2v4 design, I found that the TCXO (40 MHz, HCMOS, 3.3 V, 0.5 ppm, –40 to +85 °C, ±15 ppm, 5.0 × 3.2 mm) — Part Number E7355LF from Rakon, listed in the BOM is currently u…

---

## [LimeSDR XTRX Hardware Timestamping with 1 PPS](https://discourse.myriadrf.org/t/limesdr-xtrx-hardware-timestamping-with-1-pps/12949)

<div class="topic-metadata">

**Author:** [@bhopkins](https://discourse.myriadrf.org/u/bhopkins)\
**Replies:** 5\
**Last updated:** [24 October 2025 06:50 UTC](https://discourse.myriadrf.org/t/limesdr-xtrx-hardware-timestamping-with-1-pps/12949 "2025-10-24T06:50:33Z")

</div>

Hi, I’m looking to buy two XTRX’s for use in an interferometry project and I was wondering if the XTRX hardware timestamps received samples using an external 1PPS signal from a GPSDO. The receivers would be placed at se…

[Previous page](https://discourse.myriadrf.org/c/projects/limesdr/21.md?page=1)

[Next page](https://discourse.myriadrf.org/c/projects/limesdr/21.md?page=3)
